Hangar Silo EVEREST
Hangar Silo EVEREST, in front of fire in PVC 720 with gray skylights | static com (underground)
The pointed gable roof design allows precipitation to drain off especially easily
Large hinged door with quick opening on both sides of the gable end
Hot-dip galvanized steel construction with a 10-year warranty
Premium quality fire resistant canvas, extremely robust and heavy with a 5 year warranty
Transparent skylight strips for more natural light in the tent
hot galvanized steel construction
continuous roof and side canvas
2 parts of the gable with zippered door
Incl. Solid steel pegs - length approx. 100 cm
Strings of type
(+34) 642 291 930 - (+351) 934 618 402
Warehouse Tent 10x20
The construction of this EVEREST Warehouse Tent guarantees a high level of stability, even under heavy loads. It is characterized by a first-class, hot-dip galvanized, corrosion-free steel frame with a 10-year guarantee against rust perforation. Thanks to the high sides, this room offers a max. Degree of useful space. Depending on the surface, the EVEREST Warehouse Tent can be securely attached to the ground with the appropriate anchoring system. There are ratchets on the footrests to tighten the roof canvas at the sides. All components are bolted together with truss head screws and self-locking nuts, requiring little maintenance. The entire construction is characterized by a high level of durability.
1: Hot dip galvanized steel rods - for high durability
2: Double bolt: a secure connection.
3: Roof and lateral reinforcement: show your strength
4: Gable wall reinforcement - even better protection
5: Ground anchor: securely attached to any surface!
Hot galvanized steel rods: for high durability
All steel pipes are hot dip galvanized according to DIN EN ISO 1461 and are therefore protected against corrosion.
10-year warranty against rust perforation (see warranty conditions)
Diameter: approx. 78 mm vertically, approx. 48 mm horizontally
Wall thickness: approx. 2.0mm vertically, approx. 1.5 mm horizontally
Pipe roof construction: approx. 60mm diameter, approx. 1.5 mm wall thickness
Double bolting: a secure connection.
With this stable bolt construction, all rods that run vertically are bolted twice (with double bolts) with a push screw connection.
insensitive and low maintenance
reinforces the entire construction
Using truss head bolts with self-locking nuts
for vertical steel tubes M10 x 90 mm
with horizontal steel tubes M12 x 100 mm
Roof and side reinforcement: show your strength
The use of additional reinforcing steel elements on the roof and side surfaces specifically deflects weather-related forces. That makes this build particularly robust.
Steel tube reinforcements between the rafters along the entire length of the roof
Using a Collar Beam Strut with Ridge Connector
Diagonal struts in the corners to reinforce the side frame
Gable wall reinforcement: even better protection
The sides of the gable also offer large areas of attack from the wind. A stiffening in the pediment not only contributes to additional overall stability, but also slows down the front wind and protects the tarp from damage.
Anchoring to the ground: securely attached to any surface!
The ground anchor can be selected depending on the surface and is included in the scope of supply. The delivery includes concrete anchors (M12) or solid dowels 1 m long (M16).
It is not necessaryor provide a base for anchoring.
The room is fixed to the floor with 3 hard or 3 soft floor anchors per foot, depending on the subfloor
Anchorage in soft ground using solid steel nails 100 cm long
Anchoring in hard ground with concrete blocks 10 cm long
Tip: For a fastening to floating pavers, dowels must be used.
Canvases and doors
1: Roof and side canvas: 100% waterproof throughout
2: fire retardant canvas
3: Two-dimensional canvas tensioning system: for optimal stability and reduced risk of damage
4: Two comfortable folding doors for maximum freedom of use
5: XXL floor apron: additional protection against moisture and wind
Approximately 720 g / m² 20The tough PRIME tarp is a particularly robust, state-of-the-art tarpaulin, designed for year-round use in extreme environmental conditions. It is made of high-quality cast PVC, which completely encloses the integrated and particularly fine mesh inner mesh fabric. This makes PRIME canvas extremely resistant and 9 times more resistant to tearing than PVC canvases available on the market, certified according to DIN EN ISO 527. PVC canvas is characterized by a high level of resistance to weathering and UV rays and is extremely durable. With a temperature resistance of +50 to -30 ° C, maximum UV protection and fire protection certification, PRIME canvas proves to be a reliable protection even for use in public areas. The shiny and smooth appearance is particularly easy to care for and easy to clean.
A 5-year warranty (see warranty conditions) is given on the closed and correctly installed PVC tarpaulin.
Roof and side canvas: 100% waterproof throughout
The continuous roof and side tarpaulin is in one piece, holds the structure firmly together and is therefore an important component of stability.
all welded and unstitched seams
High quality cast PVC canvas with dense inner fabric, certified according to DIN EN ISO 527
PVC material has a thickness of approximately 720 g / m² 20, comparable to the tarpaulin of a truck
Temperature test passed for temperatures from -30 to +50 degrees Celsius
High resistance to UV rays and excellent protection against UV rays.
Brass stainless steel eyelets
Interior illuminated thanks to skylight strips on canvas roof: save energy costs for lighting
Sturdy clear PVC skylights with reinforcing fabric mesh
Flame retardant canvas
The PVC material certified as fire retardant corresponds to the current European regulations:
Certificate number EN - 13501-1 * 9)
This certificate is accepted and preferred in these countries: D, F, GB, I, E, PL, RO, NL, GR, P, B, CZ, HR, A , BG, DK, SE, HU, SK, FIN, IRL, LT, LV, EST, L
As requested by the legislator, supersedes older standards:
D - DIN 4102 - B1 / B2
I - UNI 8456
F - M2
DK, S, N - SIS 650082
CH - BKZ 5.2
Two-dimensional canvas tension system: for optimal stability and reduced risk of damage
Here, the tarp is stretched firmly both horizontally and vertically over the tent construction and thus reduces the risk of damage to the tarpaulin by wind and storm. < / p>
For horizontal tensioning of the tarpaulin, there is a ratchet on each platform to tension the roof tarp on the sides.
for vertical tension, the lona fits securely on both sides of the gable using a tension cable system
The canvas can be readjusted at any time for a continuous, firm fit and optimal stability.
XXL floor apron: additional protection against moisture and wind
Extended floor skirt spans the entire floor and reliably protects the interior of the tent.
Let the precipitation run far enough from the tent
reduces the penetration of soil moisture
has fixing eyes inside and out
High level of security: static was established by a German engineering office registered with the Association of Consulting Engineers (VBI).
The total absorption of the wind load must be assumed according to DIN EN 1991, ie stable at the maximum measured wind force. For example, the wind force of 10 and more is not a problem with this store. * 4)
The load that can be supported for this tent is calculated in statics and is given in kg / m². * 7)
The statics are based on DIN standards: DIN EN 1990 1991 1993
The structural analysis manual and all parts necessary for assembly are included in the scope of supply.
For ground anchoring, an anchoring system for concrete or ground surfaces can be selected as required.
The static ones are suitable for any presentation required to public bodies. * 8th)
For a nominal fee, we will send you the statistics before you buy the tent. In this case, contact our technical advisory service at the following phone number: +34 642 29 19 30.
Detailed structure in easy steps. Compared to solid construction, it can be done easily and in a short time.
Hassle-free assembly possible without prior knowledge thanks to assembly instructions and labeled parts
No base required
In many cases, a building permit is not required; our staff can provide you with information about this if necessary
Note: We recommend a lifting device (forklift, wheel loader, etc.) to erect the construction and roller frame, scissor lift, etc.
Packaging: Extremely strong wooden boxes with steel frames that provide protection against moisture and corrosion.
Notes on delivery
Depending on the size, the tent is delivered in one or more boxes by a transport agency.
A forklift truck or electric pallet truck with adequate load capacity is required to unload the boxes.
Depending on the size of the product, it may only be possible to unload through the side of the truck; in this case, it is not possible to unload on a ramp towards the rear
If you have any questions about delivery, please contact our tent experts at +34 642 29 19 30.
Take advantage of our unique warranties and excellent service. We focus on the customer.
10-year guarantee for rust perforation on the frame (see guarantee conditions)
5-year warranty on correctly installed closed PVC tarpaulin (see warranty conditions)
From the moment of purchase, we guarantee that we will have spare parts for this product ready for you for 10 years.
Secure purchase through the most modern payment and encryption systems
Free individual advice
Fast and insured shipping
Construction management service on request: contact our staff for more information
Service and support
High resistance to ultraviolet light and environmental influences.
less susceptible to wind
thanks to the welded seams
Certified UV 80+ sun protection factor
Optimally protects stored products from solar radiation
- Hot galvanized steel pipes
for the best protection against corrosion
- Double bolt for high stability
- Low maintenance thanks to the nuts
autoblocantes and the professional fastening system
- Optimal anchoring on almost any surface
Details and dimensions
Details and dimensions
Tarps: approximately 720 g / m² 20; 100% PVC
Ø steel tubes
vertical: approx. 78 mm
horizontal: approx. 48 mm
Wall thickness pipes
vertical: approx. 2.0 mm
horizontal: approx 1.5 mm
Ø: approx. 78 mm
Wall thickness: approx. 2.0 mm
Construction of pipe ceilings
Ø: approx. 60 mm
Wall thickness: approx 1.5 mm
Observe the safety instructions in the assembly instructions.
In some countries, such as Germany, tents in a certain area (generally more than 75 m²) and / or if they are installed in certain locations may require a permit. It is the sole responsibility of the shop owner to ensure that these local regulations are followed and that assembly is carried out correctly. We would like to point out that a tent book according to EN 13782 has not been created for this type and you may need to order it yourself.
5 *) The values specified for the wind and snow loads apply individually and must not appear together.
6 *) The specified values for the wind and snow loads can be found in the corresponding statistics.
7 *) Please note the information in the statistics. For safety reasons, fresh snow should be removed from the tarp as soon as possible.
8 ° *) We refer to our previous experience and we cannot guarantee the integrity of future claims.
9 *) In the case of products with window elements, these are excluded. The window material is fire retardant, so it dissolves in a controlled manner and therefore air can enter the interior of the store in an emergency.
20 *) Due to fluctuations related to production, there may be deviations within a tolerance range of 10%. This does not affect the quality of the canvas.
- MARQUEES STYLE
- BELL TENTS